| Falke Build Up
or how to Dremel a masterpiece. I've decided to change the subtitle for this build. It's now '101 Ways to Ruin a perfectly Good Kit' |
||||
 |
||||
| Here we have the thinned engine bay. I've also carved back the rear of the bay so that when I put in the new bulkhead it looks hollow behing it. | ||||
 |
||||
| This is the proposed bulkhead/engine mount. Because the plan is to have both bays open and one engine removed I've draw out the bolt placement for the engine. Still have to figure support bolt & rivet placeent. | ||||
 |
||||
| Wanting a little more detail in the rear tube I sanding down this bit of detail to fit. Unfortunately my want for more detail caught up to me and I ended up doing a bit more work. |
||||
 |
||||
| Namely drilling out the exhaust so I could chuck it into the lathe and turn the hole out just a wee bit. | ||||
 |
||||
| So that I could slide this bit in. Sweet, eh? | ||||
 |
||||
| I also carved out some of the rear vents. They'll be filled with some Wave parts and PE. | ||||
 |
||||
| The bench. And a sleepy cat. I've done some work on the cockpit. Plan is to add some more boxes (this will be a command/scout varient), wires, the usual along with a 5 point harness and pedals. |
||||
| Page 2 | ||||